English version Send a mail Visit photo gallery Visit video gallery Manual download page Info on orders, payment, ... Home/product page Italian version

Release notes and product updates


LiPoMonitor
01.09.2005

With some speed regulators equipped with a switch for BEC voltage it could happen that sometimes the product will not switch-on. This is due to the fact that on the circuit it is already present the battery voltage when the BEC voltage is switched on and this can affect the power on reset internal circuit of the microcontroller. In this case switch off, wait few seconds (min. 5) and switch on again the device.
If the circuit is powered by direct connection with the battery the problem will not happens.

During the normal function mode the LED blinks every 2 seconds to indicate that the circuit is working.

These notes are included in the new
version 1.01 of user's manual.



 RC-FlySoft last update: 8/29/2005