English version Send a mail Visit photo gallery Visit video gallery Manual download page Info on orders, payment, ... Home/product page Italian version

Modify the Yakumo IV for aerial photography

The shutter button is located on a small board placed on the top of the camera that also contains the power switch, the function selector and the piezo speaker. Due to the presence of the function selector it is not possible to solder the wires directly to the switch, but the same signals are also available on the connection points of the two boards.

The black wire of the RC Switch must be connected to the GND pole (black circle) and the signal wire (Red) on the pin in the RED circle.

A quick test with the RC switch before closing the camera and you can now install it on your plane, connect the interface and start clicking!!


 RC-FlySoft last update: 6/7/2005