1W LED head-lamp with electronic driver board and RC interface

Very powerful 1W Led head-lamp with lens and electronic driver board. Connected to your RC receiver and to the battery can be controlled by a channel of the RC system Three selectable function modes: head-lamp (on-off mode), custom blink with programmable on and off periods and strobo mode; 'soft-off' function to reproduce the slow switch off typical of bulb lamps Available in two versions: open (diameter 25.5mm.) and closed (diameter 21.5 mm.).

Open version 25.5 mm.

Closed version 21.5 mm .

Electronic board diam. 26 mm.

Head lamp on a T-REX

A driver board can have one ore more led connected, according with the available battery voltage: 1 Lipo (3/4 NiMh): 1 LED 2 Lipo (6/7 NiMh): suggested 2 LED (series connection) or 1 LED if not continuously on. 3 Lipo (9/10 NiMh): suggested 3 LED (series connection) or 2 LED if not continuously on. The board can handle a maximum of 12V and 4 LED connected with a constant current of 350 mA. Please check on the user's manual for different led connection.

---

Download user manual in PDF format: Driver board available in two versions: 1 - Universal with JR/Graupner/Hi-Tec rc connector 2 - Futaba with Futaba polarized connector Head Lamp available in two versions: 1 - Open, diameter mm. 25.5 with lens and white power led 1W 2 - Closed, diameter mm. 21.5 with lens and white power led 1W

---

Price list
(handling and shipping added at check-out)

Select connector: UniversalFutaba € 22.00

Driver board Cod.: FS022001 Available

---

Open version € 17.00

Head lamp Cod.: FS023001 Available

---

Closed version € 16.50

Head lamp Cod.: FS023002 Available

---

White power led 1W € 8.00

White power led Cod.: FS024000 Available

---

Head lamp case - open € 9.50

Head lamp case with lens, diam. 25,5 Cod.: FS020501 Available

---

Head lamp case - closed € 9.00

Head lamp case with lens, diam. 21,5 Cod.: FS020502 Available

---

View your cart and go to check-out:

TOP PAGE

---

RC-FlySoft last update: 6/25/2007